18ENGYou can scan for the frequency ranges available to you (andavailability depends on your country). Automatically allocatedprogramme numbers may not correspond to actual or desiredprogramme numbers. However you can sort numbers manually andclear any channels you do not wish to watch.1 Press the MENU button.Result: The main menu is displayed.2 Press the or button to select Channel.Result: The options available in the Channel group aredisplayed.3 Press the button.Result: The Auto store is selected.4 Press the button again.Result: The options available in the Auto store group aredisplayed with Country is selected.5 Select your country by pressing the ➛ or ❿ button.The countries are displayed in the following order:Belgie - Deutschland - Espania - France - Italia -Nederland - Schweiz - Sverige - UK - East europe - Others.6 Press the or button to select Search.7 Press the ➛ or ❿ button to start the search.Result: The horizontal bar is displayed, and then channels arestored in an order which reflects their positions in thefrequency range. Finally, the search will endautomatically.➢ To stop the search before it has finished, press the MENUbutton.8 When searching and storing are complete, the Sort menu isdisplayed. To sort the stored channels into the desired numerical order,go to Step 6 of the “Sorting the Stored Channels” procedureon page 19. To exit from the channel store function without sorting thechannels, press the MENU button repeatedly until the menusdisappear.9 When the channels have been stored, you can: Sort them in the order required (refer to page 19) Assign a name to the stored channels (refer to page 22) Clear a channel (refer to page 23) Fine tune channel reception if necessary (refer to page 24) Activate the Digital Noise Reduction feature (refer to page 28)Storing Channels AutomaticallyChannelAuto store ❿❿Manual store ❿❿Name ❿❿Add/Erase ❿❿Fine tune ❿❿Sort ❿❿Auto storeCountry : OthersSearch : -/+Auto storeCountry : OthersSearch : -/+P 1 C-- -----106 MHz 7 %SortFrom : P 1 -----To : P-- -----Store : ?