Samsung SP42W4 Owner's Instructions Manual

Also see for SP-42W4: Owner's instructions Owner's instructions Control Panel Manual Owner's instructions Owner's instructions

Contents

47Programming the Remote Control for Other ComponentsENGThis TV’s remote control can operate almost any VCR, Cable box,or DVD, in addition to controlling the TV.➣ The remote control might not be compatible with the TVmanufactured by another company.1 Turn off your VCR, Cable box, or DVD.2 Press the appropriate button among the component selectionbuttons to activate another component (TV, VCR, Cable, DVD).Example: If you want to program the remote control to operateyour VCR, press the VCR button on the remotecontrol.3 Press the SET button.4 Use the numeric buttons to enter the code by manufacturer. Eachcode must be three digits long.Example: To enter the code “6”, press 0, 0, and 6.To enter the code “76”, press 0, 7, and 6.➣ See the remote control code tables to find the appropriatecode for your particular component. If more than one codeis listed, try each one separately until you find the one thatworks.5 Press the Power ( ) button on the remote control. Thecomponent you select should turn on. If it turns on, your remotecontrol is now set correctly.➣ If it does not turn on, repeat steps above, but try one of theother codes listed for the brand of particular yours. If noother codes are listed, try each code, “000” through “089”for VCR/DVD and “000” through “077” for Cable box.6 Once your remote control is set up, press the SET button any timeyou want to use the remote to operate your Cable box, VCR orDVD.➣ When your remote control is in the VCR, Cable, or DVDmode, the volume buttons still control your TV’s volume. When your remote control is in the TV or Cable mode,the VCR or DVD control buttons (PLAY, PAUSE, etc.)still operate your VCR or DVD.SETDVDCableVCRTVPower