Samsung SP42W4 Owner's Instructions Manual

Also see for SP-42W4: Owner's instructions Owner's instructions Control Panel Manual Owner's instructions Owner's instructions

Contents

28ENG Scan modeYou will normally find that scan mode is best set to Naturalto reduce any slight picture flicker. However, it is possible thatsome occasional broadcasts (NTSC-M) may benefit bychanging the scan mode. Auto, Natural, Digital andProgressive modes are available. Digital NRIf the signal received by your television is weak, you canactivate this feature to reduce any static and ghosting thatmay appear on the screen. Blue screenIf no signal is being received or the signal is very weak, a bluescreen automatically replaces the noisy picture background.If you wish to continue viewing the poor picture, you must setthe Blue screen mode to Off. LNAThis feature is very useful in the situation that the TV is usedin a weak signal and amplifies the TV signal in the weaksignal area, but not noise.This feature is working only in a weak signal condition, andthat is memorized on current channel, additional.1 Press the MENU button.Result: The options available in the Picture group aredisplayed.2 Press the button.3 Select the required option (Scan mode, Digital NR, Blue screenor LNA) by pressing the or button.4 Press the ➛ or ❿ button to change the setting. Scan mode : Auto, Natural, Digital, Progressive Digital NR : Off or On (activating) Blue screen : Off or On (activating) LNA : Off or On (activating)Extra Picture SettingsPictureMode ➛➛ Dynamic ❿❿Adjust ❿❿Scan mode : NaturalDigital NR : OnBlue screen : OffLNA : OffPictureMode ➛➛ Dynamic ❿❿Adjust ❿❿Scan mode : NaturalDigital NR : OffBlue screen : OnLNA : OffPictureMode ➛➛ Dynamic ❿❿Adjust ❿❿Scan mode : NaturalDigital NR : OffBlue screen : OffLNA : OnPictureMode ➛➛ Dynamic ❿❿Adjust ❿❿Scan mode : NaturalDigital NR : OffBlue screen : OffLNA : Off