30Self-timer ( ) / Right button The Motion Timer flows are as followings. (Movie Clip mode excluded)Selecting the Motion Timer Pressing the Shutter button Confirming the composition (Within 6 sec.) *1 Starting thedetection (Swing your hands fully) *2 Stopping the detection(Do not move) Taking an image (after 2 sec.)*1: The camera detects the subject's movement 6 seconds after pressing theShtter button, so confirm the composition within 6 seconds.*2: Move your body or hands fully.In the following cases, the Motion Timer may not operate. The focus distance is over 3m. The exposure is too bright or dark In backlight conditions. The movement is insignificant The movement is detected beyondthe center part (50%) of the sensorwhere the movement is recognized. If the camera doesn`t sense anymovement for 30 seconds, or thecamera doesn’t sense stillnessafter sensing movement Motion TimerMotion Icon & Self-timer lampPressing the Shuter button aftersetting the Motion Timer Blink (1 second interval)Detecting the subject's movement Blink (0.25 second interval)No movement is detected Turn on and the image is takenafter 2 secondsThe detection range ofMotion Timer
