Schedule Recording / TimeshiftThere is somethingwrong with the TV. Try this!The TV cannotrecognise the USBdevice or the FormatDevice, CheckDevice and DevicePerformance Testfunctions fail.Refer to the USB device's manual and see if data can be stored on it.Check if the USB device is in a locked state.Check if the USB device was formatted when it was connected to a computer.Formatting a USB device after connecting it to the TV may result in a formattingfailure. If Device Performance Test or Format Device has failed, there may be aproblem with the USB device or its specifications. Try using a different USB device.There is a messagesaying I need toformat the USBstorage device.Check if the USB device is in a locked state.Use the USB recovery function to recover the USB device.Schedule Recordingcannot be used.Check if there is a USB device connected to the TV.Check if the channel is a digital channel that can be recorded. Recording willautomatically stop if the signal becomes too weak. The Timeshift function will notwork if there isn't enough storage space on the USB device.I get a performancetest failure messageand then ScheduleRecording and theTimeshift operationstops working.This problem can occur when using a low-performance USB storage device thatdoes not support recording. A USB hard drive with a speed of 5,400rpm or aboveis recommended. However, RAID-type USB hard drives are not supported.
