English Using the MenusSelecting the SpeakerTV’s Internal Speakers Audio Out (Optical) to SoundSystemRF / AV / Component / PC / HDMI RF / AV / Component / PC / HDMITV Speaker Sound Output Sound OutputExternalSpeaker Mute Sound OutputVideo No Signal Mute MuteSoundOption DescriptionSound Select When the PIP feature is activated, you can listen to thesound of the sub (PIP) picture.You can select this option when PIP is set to On.■Sound Reset You can restore the Sound settings to the factory defaults.Reset Sound Mode: Current sound values return to defaultsettings.Selecting the Sound ModeYou can set the sound mode in the Tools menu. When you set to Dual l ll, the current soundmode is displayed on the screen.Audio Type Dual 1 / 2 DefaultA2StereoMono MONO Automatic changeStereo STEREO ↔ MONODual DUAL 1 ↔ DUAL 2 DUAL 1NICAMStereoMono MONO Automatic changeStereo MONO ↔ STEREODual MONO ↔ DUAL 1DUAL 2 DUAL 1If the stereo signal is weak and an automatic switching occurs, then switch to the mono.This function is only activated in stereo sound signal. It is deactivated in mono soundsignal.This function is only available in TV mode.■■■Press the TOOLS button todisplay the Tools menu. You canalso set the sound of the subpicture by selecting Tools → PIP→ Sound Select.■Sound ResetL Move E Enter R ReturnCancel sound reset.Reset All Reset Sound Mode Cancel
