Samsung UE40B7020 User Manual

Also see for UE40B7000WW: Service manual

Contents

English Using the MenusBroadcastSecurityNetwork ▶GeneralSetupThe menu is activated only if the‘Samsung Wireless LAN Adapter’is connected.■Setting the NetworkSetupOption DescriptionNetwork Type Select Cable or Wireless as the method to connect to thenetwork.CableConnect to the network using a cable.WirelessConnect to the network wirelessly.■■Network Setup Cable Network Setup(when Network Type is set to Cable)Please check if the LAN cable is connected.Internet Protocol Setup → Auto / ManualNetwork Test: You can test or confirm the networkconnection status after setting up the network.Cable Network Setup-AutoIf you connect the LAN cable and it supports DHCP, theInternet Protocol (IP) Settings are automatically configured.1. Set Network Type to Cable.2. Select Cable Network Setup.3. Set Internet Protocol Setup to Auto.The Internet Protocol is set automatically.4. Select Network Test to check the network connectivity.❑■■When unable to connect to a wired networkIf your Internet service provider has registered the MAC address of the device used toconnect to the Internet for the first time and authenticates the MAC address each time youconnect to the Internet, your TV may not be able to connect to the Internet as the MACaddress differs from that of the device (PC).In this case, ask your Internet service provider about the procedures to connect devicesother than your PC (such as your TV) to the Internet. If your Internet service providerrequires an ID or password to connect to the Internet (network), your TV may not beable to connect to the Internet. In this case, you have to enter your ID or password whenconnecting to the Internet using an Internet Sharer (Router).The internet connection may fail due to a firewall problem. In this case, contact yourInternet service provider. If you cannot connect to the Internet even if you have followedthe procedures of your Internet service provider, please contact Samsung Electronics.Internet Protocol Setup : Auto ▶Network TestU Move E Enter R ReturnCable Network SetupIP Address :Subnet Mask :Gateway :DNS Server :