Samsung WAM270 User Manual

Contents

A Connecting with NFC function - For AndroidYou can connect the Link Mate to Bluetooth devices easily by gently touching the Bluetoothdevice to the mark on the top panel of the Link Mate.Connect your NFC compatible device to enjoy music with high quality stereo sound, all withoutwires.NOTES9 To produce audio through the Link Mate, an external device must be connected. (See page 12)Press here1 Plug the Link Mate into an electrical outlet.2 Turn on the NFC function on your Smart device, and then gently touch the device to themark on the top panel of the Link Mate.3 The Bluetooth screen appears on your Smart device.4 Select OK.5 Select the desired track to play from your smart device's music list.6 The Link Mate plays the track you selected.NOTES9 To disconnect the Bluetooth connection, gently touch the smart device to the mark on the toppanel of the Link Mate again.9 Please be careful not to touch the other buttons around the NFC tag.9 Do not place or play back your NFC device on top of the NFC tag on the Link Mate. Vibrations from themusic may cause the device to tip over and cause the Link Mate to disconnect or damage the device.9 The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.9 The position of the NFC antenna differs on different devices. Check where the NFC antenna is beforeconnecting.9 If your device is covered with a thick case, the connection may not succeed.9 The mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and inother countries.9 If you unplug the Link Mate, the NFC connection is terminated. To re-establish the connection, plugthe Link Mate into an outlet, and then set the NFC connection again.VOLUMEConnectSmart device364444