` When the Link Mate in use is connected using WPS or the Wi-Fi Setup method1 Connect the HUB to your wireless router with a LAN cable, and then plug the HUB'spower cable into an electrical outlet.2 Plug in the power cable of the new Link Mate. The new Link Mate's blue LED pairingindicator starts to flash. Wait until the pairing indicator on the Link Mate stops flashing.When the indicator stops flashing, pairing is complete. The Link Mate may also beep.3 Turn off the old Link Mate by disconnecting the power cable. Then, reconnect it. Pressthe DEVICE ADD button on the back of the old Link Mate. The old Link Mate's blueLED pairing indicator starts to flash. Wait until the pairing indicator on the Link Matestops flashing.When the indicator stops flashing, pairing is complete. The Link Mate may also beep.4 On your smart device, select the Samsung Multiroom app. Setup starts.414444
