❚ Adding another Link Mate and Hub to a single Link Mate in use` When the Link Mate in use is connected to the router with a LAN cable1 Disconnect the LAN cable from the Link Mate in use.2 Connect the HUB to the wireless router with the LAN cable, and then plug in theHUB's power cable.3 Plug in the power cable of the new Link Mate. The new Link Mate's blue LED pairingindicator starts to flash. Wait until the pairing indicator on the Link Mate stops flashing.When the indicator stops flashing, pairing is complete. The Link Mate may also beep.4 Turn off the old Link Mate by disconnecting the power cable. Then. connect it again.Press the DEVICE ADD button on the back of the Link Mate. The Link Mate's blueLED pairing indicator starts to flash. Wait until the pairing indicator on the Link Matestops flashing. When the indicator stops flashing, pairing is complete. The Link Matemay also beep.5 On your smart device, select the Samsung Multiroom app. Setup starts.404444
