064Display ( )If you enable Quick View before capturing an image, you can viewthe image you just captured on the LCD monitor for the durationset in the [Quick View] setup. Quick view is possible only with stillimages.- Sub menus[Off] : The quick view function can’tbe activated.[0.5 sec]*, [1 sec], [3 sec]: The captured image is brieÀydisplayed during the selectedtime.Quick viewIf you set the [Power Save] to On and the camera isn't operatedduring the speci¿ed time, the LCD monitor will be turned offautomatically.- Sub menus[Off]* : The LCD monitor will not be turned off.[On] : If the camera isn't operatedduring the speci¿ed time (about 30SEC.), the camera power will beidle (Camera status lamp:Blinking)automatically.Ä You can’t set the [Power Save] menu of Playback Mode.Display SAVEBack SetFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishGrid Line :2 X 2Off0.5sec1sec3secBack SetFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishGrid Line :2 X 2OffOn