safety information _7CAUTION SIGNS FOR INSTALLATIONThis appliance should be positioned in such a way that it is accessible to the power plug.- Failing to do so may result in electric shock or fire due to electric leakage.Install your appliance on a level and hard floor that can support its weight.- Failing to do so may result in abnormal vibrations, noise, or problems with the product.Unplug the power plug when the appliance is not being used for long periods of time orduring a thunder/lightning storm.- Failing to do so may result in electric shock or fire.SEVERE WARNING SIGNS FOR USINGIf the appliance is flooded, cut the power immediately and contact your nearest servicecenter.If the appliance generates a strange noise, a burning smell or smoke, unplug the powerplug immediately and contact your nearest service center.- Failing to do so may result in electric shock or fire.In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately withouttouching the power plug. Do not touch the appliance or power cord.- Do not use a ventilating fan.- A spark may result in an explosion or fire.Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol orother flammable or explosive substances.- This may result in electric shock, fire or an explosion.Do not open the washer door by force while it is operating (high-temperature washing/drying/spinning).- Water flowing out of the washer may result in burns or cause the floor to be slippery.This may result in injury.- Opening the door by force may result in damage to the product or injury.Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of thewasher before using it.Do not insert your hand under the washer.- This may result in injury.WARNINGCAUTIONSAVE THESE INSTRUCTIONSWF210AN-02832A-08_EN.indd Sec1:7WF210AN-02832A-08_EN.indd Sec1:7 2012-07-27 4:37:032012-07-27 4:37:03