Samsung WF419 Series User Manual

Also see for WF419 series: User manual User manual User manual

washing a load of laundry _2102 WASHING A LOAD OF LAUNDRYChild lockA function that prevents children from playing with your washer.Once the Child Lock function is activated, the control panel cannot be activated, preventingchildren from playing with the washer.ACTIVATING/DEACTIVATINGIf you want to activate/deactivate the Child Lock function, press the Soil Level and Signalbuttons at the same time for 3 seconds.How It works:1. To activate or deactivate the Child Lock function, press and hold both the Soil level andSignal buttons for 3 seconds. Activation/Deactivating the Child Lock function is only availablewhen the power is on.2. When the Child Lock function is activated, and any button except for the Power button ispressed, the buzzer will sound for a short period and the “Child Lock” indicator will turn offfor 10 seconds.3. The Child Lock function stays on even after the power has been turned on and off or thepower cord has been disconnected and reconnected.When buttons, other than the Power button, do not respond, please check if the ChildLock function is on.Garment+You can add or take out laundry items even after the wash has started, as long as the“Garment+ ” light is turned on. Pressing the Start/Pause button unlocks the door, unless thewater is too hot or if there is too much water in your washer. If you are able to unlock the doorand wish to continue the wash cycle, close the door and press the Start/Pause button.My cycleAllows you to activate your custom wash (temperature, spin, soil level, etc.) with one–buttonconvenience.By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The“My Cycle” light will indicate activation.You can select all options as follows in the My Cycle mode.1. Select cycle using the Cycle Selector.2. After cycle selection, set each option.See page 34 for available option settings with each cycle.3. Then, you can store the cycle and options you select by pressing the Start/Pause buttonin the My Cycle mode. The cycle and options you select will be displayed the next time youchoose the My Cycle function.You can change the My Cycle settings by repeating the same process above.The last used setting will be displayed the next time you choose the My Cycle function.WF419AA-02657G-03_EN.indd Sec10:21WF419AA-02657G-03_EN.indd Sec10:21 2011-06-22 ¿ÀÈÄ 4:09:492011-06-22 ¿ÀÈÄ 4:09:49