washing a load of laundry _2302 WASHING A LOAD OF LAUNDRYFOR SILVER CARE WASHINGAn increased consumer demand for energy-saving products prompted Samsung to develop a system touse silver, widely known for its antimicrobial properties, as a sanitizing agent in your washer.Pure silver atoms have an electron stripped away by electrolysis during the wash and rinse cycles, whichreleases up to 16 million trillion silver ions that then penetrate deep into the fabric to sanitize clothing(according to U.S. EPA Test Guideline DIS/TSS-13). It does not need hot water or bleach.Here’s how it works: A grapefruit-sized device alongside the tub uses two pure silver plates the size of largechewing gum sticks as electrodes in the water inlet system. The resulting positively charged silver atoms- Silver ions (Ag+) - are sprayed into the tub during the wash and fi nal rinse cycle.During tests, this process removed more than 99.9% of bacteria.Extra delicate blouses, shirts, or even lingerie that can’t be washed in hot water can now be sanitizedeffectively without the adverse effects of hot water. The silver plates can easily be replaced by a ServiceTechnician if needed.To use :1. Load the washer.2. Press the Power button.3. Select a cycle by turning the Cycle Selector.4. Press the Silver Care button.5. Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked line.6. Press the Start/Pause button.: The washer automatically selects optimal washing conditions by sensing the laundry’s weight.FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFY THEIR LOCAL WASTETREATMENT AUTHORITIES BEFORE USEThe total number of silver cycles run by the washer is displayed when pushing the Signal and Silver Carebuttons simultaneously while the power is on.LU1 : less than 1000 cyclesLU0 : 1000 cyclesYou cannot choose the Silver Care, with Spin Only or Wool cycle.USING STEAM WASHThe Steam Wash function injects steam directly into the laundry in the wash tub to increase the washtemperature and enhance the soak effect, thus improving the wash performance.1. Load the washer.2. Press the Power button.3. Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically selects theSteam Wash function.)4. Press the Steam button.5. Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked line.6. Press the Start/Pause button.: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.Steam may not necessarily be visible during the steam cycles.Steam may not be present during entire steam wash cycle.WF419AA-02657G-03_EN.indd Sec10:23WF419AA-02657G-03_EN.indd Sec10:23 2011-06-22 ¿ÀÈÄ 4:09:492011-06-22 ¿ÀÈÄ 4:09:49