7-8 Manual■ If You Cannot Run WindowsIf you cannot run Windows, you have to boot the system with the system recoveryCD, and reinstall Windows. If you boot the system from the system recovery CD,you can install Windows only with the user installation option. You cannot installwith the standard installation option.1. Insert the system recovery CD into the CD-ROM drive and start the computer.2. If the following message appears on the screen, press any key from the key-board.3. Do not press any key at this time. After a while the partition configuration screenappears. To not change the partition, press .4. Select the desired file system ( format ).To maintain the current file system, press .5. Select the folder to install the Windows operating system. To delete the previousversion of Windows and install in the current folder, press on the keyboard.6. After the installation process copies the necessary folders for the Windows instal-lation, restart the system, and the message °∞Press any key to boot from CD” isdisplayed. You do not need to enter anything. In a moment, the Windows XPinstallation screen will appear to proceed with the installation.7. Follow the instructions of the Windows XP installation wizard to continue with theinstallation.When the installation is complete, the computer will restart.When the system has restarted, the Press any key to boot from CD message appears.Ignore the message.The system boots and the Windows and Windows Registration screen appears.Register Windows, following the instructions to finish the Windows installation.Remove the System Recovery CD and install the device drivers and applicationprograms using Standard Installation from the System Software CD.This message appears only when the CD drive has booting priority.If the message does not appear, configure the CD drive as the first bootingdevice referring to the Changing Booting Priority in the User Guide.NN oo tt ee
