Wireless network setup2352. Using a Network-Connected Machine23Troubleshooting for wireless networkProblems during setup or driver installationPrinters Not Found• Your machine may not be turned on. Turn on your computer and themachine.• USB cable is not connected between your computer and machine. Connectthe machine to your computer using the USB cable.• The machine does not support wireless networking. Check the machine'suser's guide included on the software CD supplied with your machine andprepare a wireless network machine.Connecting Failure - SSID Not Found• The machine is unable to find the network name (SSID) you have selected orentered. Check the network name (SSID) on your access point and tryconnecting again.• Your access point is not turned on. Turn on your access point.Connecting Failure - Invalid Security• Security is not configured correctly. Check the configured security on youraccess point and machine.Connecting Failure - General Connection Error• Your computer is not receiving a signal from your machine. Check the USBcable and your machine’s power.Connecting Failure - Connected Wired Network• Your machine is connected with a wired network cable. Remove the wirednetwork cable from your machine.Connecting Failure - Assigning the IP address• Cycle the power for the access point (or wireless router) and machine.PC Connection Error• The configured network address is unable to connect between yourcomputer and machine.- For a DHCP network environmentThe machine receives the IP address automatically (DHCP) whencomputer is configured to DHCP.If the printing job is not working in DHCP mode, the problem may be causedby the automatically changed IP address. Compare the IP address betweenthe product's IP address and the printer port's IP address.How to compare:1 Print the network information report of your printer, and then check theIP address (see "Printing a network configuration report" on page 181).
