Fax2613. Useful Setting Menus4Sending setupSome menus may not appear in the display depending on options ormodels. If so, it is not applicable to your machine (see "Menu overview" onpage 36).To change the menu options:• Press (fax) > (Menu) > Fax Setup > Sending on the control panel.• Or press Setup > Machine Setup > Next > Default Setting > Fax Defaulton the touch screen.• Or press Setup > Machine Setup > Next > Fax Setup on the touch screen.Item DescriptionRedial Times Sets the number of redial attempts. If you enter 0, themachine will not redial.Redial Term Sets the time interval before automatic redialling.Prefix DialSets a prefix of up to five digits. This number dialsbefore any automatic dial number is started. It is usefulfor accessing a PABX exchange.ECM ModeSends faxes using error correction mode (ECM) tomakes sure the faxes are sent smoothly without anyerror. It may take more time.• Fax Confirmation• Fax SendConfirmationSets the machine to print a report whether a faxtransmission was successfully completed or not.If you select On-Error, the machine prints areport only when a transmission is notsuccessful.Modem speedSelect the maximum modem speed you want if thephone line fails to sustain a higher modem speed. Youcan select 33.6, 28.8, 14.4, 12.0, 9.6 or 4.8 kbps.Image TCR Prints a transmission report with a minimized image ofthe first page of the fax sent.Dial ModeSets the dialing mode to either tone or pulse. Thissetting may not be available depending on yourcountry.Toll SaveSends faxes at a preset toll-saving time to save on callcosts. This setting may not be available depending onyour country.Setup Wizard Makes it easy to configure the necessary fax optionssuch as machine ID, fax number, etc.Item Description
