321. IntroductionInstalling the driver locallyA locally connected machine is a machine directly attached to your computerusing the cable. If your machine is attached to a network, skip the followingsteps below and go on to installing a network connected machine’s driver (see"Installing driver over the network" on page 184).• If you are a Mac, Linux or UNIX operating systems user, refer to the"Installation for Mac" on page 175 or "Installation for Linux" on page 177or "Installing the UNIX printer driver package" on page 190.• The installation window in this User’s Guide may differ depending on themachine and interface in use.• Only use a USB cable no longer than 3 meters (118 inches).14Windows1 Make sure that the machine is connected to your computer andpowered on.2 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.• For Windows 8,If the installation window does not appear, from Charms, selectSearch > Apps and search for Run. Type in X:\Setup.exe, replacing“X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up windowappears, click the window and select Run Setup.exe.3 Review and accept the installation agreements in the installationwindow. Then, click Next.4 Select USB connection on the Printer Connection Type screen. Then,click Next.5 Follow the instructions in the installation window.You can select the software applications in the Select Software to Installwindow.
