Samsung iDCS 500-DCS User Manual

Also see for iDCS 500: User guide User guide Administration guide User instruction General description

CALL FORWARD OPTIONSA display keyset may review or change call forward options and destina-tions. Call forward access can be done via the keypad or by accessing thekeyset display features. To review or change call forward options:• Press TRSF 102.• Dial 0-6 to select the forward type (e.g., 1)ORPress UP or DOWN to select the forward typePress the right soft key to move the cursor• Dial the destination number (e.g., 202)ORPress UP or DOWN to select the destinationPress the right soft key to move the cursor• Dial 1 to setORPress UP or DOWN to select YES or NO• Press TRSF to store and exitSTATION CALL PICKUPTo pick up (answer) a call ringing at another station, lift the handset and dial65 plus the extension number of the ringing phone.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press SPK or MONITOR before you begin dialing.GROUP CALL PICKUPTo pick up (answer) a call ringing in any pickup group, lift the handset anddial 66 plus the desired group number 01–20 or press the flashing GROUPPICKUP key if available.NOTES:1. A group pickup key can have an extender for a specific pickup group.2. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press SPK or the MONITOR key if you are using a 7B phonebefore dialing the access code.23If you want a specific extension’s calls forwarded to your phone (Remote CallForward):• Dial 605 plus the desired extension number.• Receive confirmation tone and hang up.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press SPK before you begin dialing.FORWARD TO AN EXTERNALNUMBERTo forward outside calls to a number outside of your business, you musthave a FWD EXTERNAL button on your keyset.• While on-hook, press TRSF and then dial 102.• Dial 6.• Dial the outside line access code followed by the telephone number thatyou want.• Press TRSF to store.• Press FWD EXTERNAL to turn the feature on and press it again to turnthe feature off.NOTES:1. External Call Forward will cancel all other call forwarding instructions.2. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press SPK or the MONITOR key if you are using a 7B phone beforeyou begin dialing.3. Intercom calls to your station may be forwarded to an external numberoutside your business, if your installation company has enabled this fea-ture.FORWARD DNDTo forward your phone when you activate DND.• Dial 607 plus the extension number or group number.• Receive confirmation tone and hang up.NOTE:1. If the Hot Keypad feature has been turned off you must first lift the hand-set or press SPK before you begin dialing.22