Samsung iDCS100 System Administration Manual

Also see for iDCS100: Programming manual

Contents

Samsung iDCS100 System Administration Guide22ACTION DISPLAY1. Press Transfer (or TRSF) 106Display shows2. Dial the station number (e.g., 205) ORpress the VOLUME keys to select the stationand press the right soft key to move thecursorIf the selected station has no speed dialbins, this display will be shown and anew station may be selected3. Dial the speed dial location (e.g., 05) ORpress the VOLUME keys to scroll through thespeed dial numbers and use the right softkey to move the cursor4. Enter the name using the procedure describedin Program Station Names5. Press the F key to return to Program PersonalSpeed Dial Numbers For StationsOR press the right soft key to return to step 2OR press the left soft key to return to step 3OR press Transfer (or TRSF) to store and exit programmingOR press SPEAKER to store and advance to thenext program• ASSIGN SPEED DIALLING BLOCKS[MMC 606]Your system can have up to 1500 speed dial entries assigned. Up to 500 of these canbe allocated as system speed dials, and the remainder allocated to stations as per-sonal speed dials, with a maximum of 50 numbers per station. Consequently, the moresystem speed dials that are allocated, the fewer speed dials are available for personaluse. When assigning speed dials, this MMC displays the number of system or personalblocks that are currently assigned and also shows the number remaining to be as-signed, called the ‘Free List’. This program also allows you to delete blocks of speeddial if required.Open customer programming and follow these instructions.ACTION DISPLAY1. Press Transfer (or TRSF) 606Display shows2. Press right soft key to advance cursor[201] SPEED NAME00 :[205] SPEED NAME00 :[205] SPEED DIALSPDBLK NOT EXIST[205] SPEED NAME05 : _[205] SPEED NAME05 : SAM SMITHFREE LIST : 60SYSTEM : 20