Samsung rs61681gdsr User Manual

Contents

16_ setting up16_ setting upIn the case of the process to correct the imbalanceis the same. Open the doors and adjust them, oneat a time, as follows:1. Unscrew the nut ( 1 ) from the lower hinge until itreaches the upper end of the bolt ( 2 ) .When you release the nut ( 1 ), make surethat you use the Allen wrench provided ( 3 )to loosen the bolt ( 2 ) in a counter-clockwisedirection. You should then be able tounscrew the nut ( 1 ) with your fi ngers.2. Adjust the height difference between the doors byturning the bolt ( 2 ) clockwise ( ) or counterclockwise ( ).When you turn clockwise ( ), the doorwill move up.3. After adjusting the doors, turn the nut ( 1 )clockwise ( ) until it reaches the lower endof the bolt, then tighten the bolt again with thewrench ( 3 ) to fix the nut in place ( 1 ) .If you do not secure the nut fi rmly, the boltmay release.Refer to the next section for the best way tomake very minor adjustments to the doors.MAKING MINOR ADJUSTMENTSTO THE DOORSRemember, a levelling refrigerator is necessaryfor getting the doors perfectly even. If you needhelp, review the previous section on levelling therefrigerator.Adjustment partWhen the door of the freezer is higherWhen the door of the freezer is higherthan the fridgethan the fridgeWrenchWrenchBoltBoltNutNut123LegScrew DriverScrew DriverLegDA68-02924A-06.indb 16DA68-02924A-06.indb 16 2015. 6. 17. 2:482015. 6. 17. 2:48