Samsung series 4 460 User Manual

Also see for PN50A460: Quick setup guide

Contents

English - 1OperationTurning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.➢ It may take a while before you see a full picture.Plug & Play FeatureWhen the TV is initially powered On, basic settings proceed automatically and subsequently:➢ The Screen Saver is activated if there is no operating signal for longer than 15 minutes.1 Press the POWER button on the remote control.The message Menu language, Store Demo, Channels and Time will be set.is displayed. Press the ENTER button to enter the language.Press the ▲ or ▼ button to select language, then press the ENTER button.The message Select “Home Use” when installing this TV in your home. isautomatically displayed. Press the ◄ or ► button to select Store Demo or Home Use, then press theENTER button.➢ We recommend setting the TV to Home Use mode for the best picture inyour home environment.➢ Store Demo mode is only intended for use in retail environments.➢ If the unit is accidentally set to Store Demo mode and you want to return toHome Use (Standard) : Press the Volume button. While the volume OSD isdisplayed, press and hold the MENU button for 5 seconds.➢ The Screen Saver is activated if there is no remote control key input forlonger than 1 minute while Plug & Play is running.4 Press the ▲ or ▼ button to memorize the channels of the selected connection.Press the ENTER button to select Start.➢ Air : Air antenna signal.Cable : Cable antenna signal.Auto : Air and Cable antenna signals.➢ In Cable mode, you can select the correct analog signal source amongSTD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTERbutton. If you have Digital cable, select the signal source for both Analog andDigital. Contact your local cable company to identify the type of cable systemthat exists in your particular area.Continued...Select “Home Use” when installing this TV inyour home.Plug & PlayStore Demo Home UseEnterMoveSelect the language of the OSD.Language :Plug & PlayEnglishEspañolFrançaisEnterMoveMenu language, Store Demo,Channels and Time will be set.iStartEnterPlug & PlaySelect the antenna to memorize.AirCableAutoPlug & PlayStartStartEnter SkipMoveStartPlug & PlayEnter SkipMoveSelects a cable signal type for your location.StartSTDHRCIRCAnalogSTDHRCIRCDigital