Samsung series 4 460 User Manual

Also see for PN50A460: Quick setup guide

Contents

English - 5Setting Up Anynet+The following settings are to use Anynet+ functions.Scanning and Switching between Anynet+ Devices1 Press the TOOLS button.➢ Anynet+ devices connected with the TV are listed. Press the ▲ or ▼ button to select to a particular device and press the ENTERbutton. It is switched to the selected device. If you cannot find a device you want, press the ▲ or ▼ button to selectSearching Connections, then press the ENTER button.The message Configuring Anynet+ Connection... is displayed.When searching devices completes, the connected devices are listed in theAnynet+ menu.To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press theENTER button. Press the ▲ or ▼ button to select Setup, then press the ENTER button.4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC).5 Press the ▲ or ▼ button to select On, then press the ENTER button.➢ The Anynet+ (HDMI-CEC) function is enabled.➢ If you select Off, Anynet+ (HDMI-CEC) is disabled.➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ relatedoperations are deactivated.Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off4 Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.5 Press the ▲ or ▼ button to select Yes, then press the ENTER button.➢ The Auto turn off function is enabled.➢ If you select No, the Auto turn off function is canceled.Press the EXIT button to exit.➢ The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function.➢ If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off.However, if the device is recording, it may not be turned off.➢ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switchingoperation.➢ The time required to scan for devices is determined by the number of connected devices.➢ When the device scan is complete, the number of found devices is not displayed.➢ Although the TV automatically scans devices when it is turned on using the POWER button, devices connected whenthe TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to searchdevices.➢ If you have selected external AV device by pressing the SOURCE button, you cannot use the Anynet+ function. Makesure to switch to an Anynet+ device by using the TOOLS button.Anynet+ SetupAnynet+ (HDMI-CEC) : On ►Auto Turn Off : On ►Searching Connections ►Enter ReturnMoveAnynet+ SetupAnynet+ (HDMI-CEC) : OffAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveOffOnAnynet+ SetupAnynet+ (HDMI-CEC) : OnAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveNoYesEnterMoveRecevier: OnConnect RecorderSetupTV Air ReturnRecevier: OnConnect RecorderSetupTV Air EnterMove Return