Samsung series 4 460 User Manual

Also see for PN50A460: Quick setup guide

Contents

English - Resetting the Picture Settings to the Factory Defaults1 To select the desired picture mode, follow the Activating Picture Optionsinstructions numbers 1 and 2. (see page 26) Press the ENTER button to select Picture.Press the ▲ or ▼ button to select Reset, then press the ENTER button.Press the ◄ or ► button to select OK or Cancel then press the ENTER button.Press the EXIT button to exit.➢ Each mode can be reset.4 Press the ▲ or ▼ button to select Picture, Option then press the ENTERbutton.Press the ▲ or ▼ button to select D Effect then press the ENTER button.5 Press the ▲ or ▼ button to select Mode, then press the ENTER button.Press the ▲ or ▼ button to select Off, Mode1 or Mode then press theENTER button.• Off : Turns the 3D Effect function off.• Mode1 : Mode 1 operates with right sync first.• Mode : Mode 2 operates with left sync first.➢ You should choose Off to end 3D Effect completely.➢ If the 3D effect is not working properly, it means the Mode and 3Dglasses may not be syncing properly. To put them in sync, switch to theother mode.Changing the FormatSelect the optimal input format to match your graphic cards or 3D Software.See the descriptions for Steps 1 to 4 above.5 Press the ▲ or ▼ button to select Format, then press the ENTER button. Press the ▲ or ▼ button to select Checkerboard, Horizontal or Verticalthen press the ENTER button.CheckerboardIf the output format of your graphic card or 3Dsoftware is Checkerboard, select this inputformat.HorizontalIf the output format of your graphic card or 3Dsoftware is Horizontal interleaved, select thisinput format.VerticalIf the output format of your graphic card or 3Dsoftware is Vertical interleaved, select this inputformat.Easy Setting1 Press the TOOLS button on the remote control.2 Press the ▲ or ▼ button to select D Effect.3 Press the ENTER button to start the 3D Effect.PictureT V▲ MoreDetailed Settings ►Picture Options ►Reset : OK ►EnterMove ReturnPicture OptionsT V▲ MoreScreen Burn Protection ►3D Effect ►EnterMove ReturnPictureT V▲ MoreDetailed SettingsPicture OptionsReset :EnterMove ReturnOKCancelD EffectT VMode :Format :EnterMove ReturnOffMode 1Mode 2D EffectT VMode : Mode 1Format :EnterMove ReturnCheckerboardHorizontalVerticalTools3D Mode ◄ Off ►Anynet+ (HDMI-CEC)Picture Mode : DynamicSound Mode : StandardSleep Timer : OffSRS TS XT : OffEnergy Saving : OffMove Adjust Exit