Sanyo DP42746 Owner's Manual

Also see for DP42746: Quick and easy setup Connection guide Service manual

Sanyo DP42746 Owner's Manual Manual pdf 19 page image

DIGITAL CABLE SEARCH (OPTIONAL)This DTV can receive unscrambled (ClearQAM) digitalcable channels, when available. However, not all cablecompanies provide ClearQAM digital channels.Searching for digital cable channels will take about 10minutes, please be patient.1 Connect a Digital Cable signaldirectly to the DTV Digital AntennaIn Terminal.2 Press the TUNER key to select the Digital Tuner.3 Press the MENU key to display the Main menu.4 Use the CURSOR keys to highlight (green)Digital Cable Search. Press ENTER.5 Use the CURSOR key to selectYes. PressENTER.NOTE: After Channel Search is complete, the DTV will tune tothe lowest Digital Cable channel (or lowest Analogchannel if no Digital Cable channel is found).DIGITAL ADD-ON SEARCHUse this feature to add new channels to the digitalantenna channel database. Also, use this feature to addchannels when broadcast towers are in multiple direc-tions from your location.1 Press the TUNER key to select the Digital Tuner.2 Press the MENU key to display the Main menu.3 Use the CURSOR keys to highlight (green)Digital Add-On Search. Press ENTER.4 Use the CURSOR key to selectYes. PressENTER.NOTES: Turn your Antenna and repeat these steps for eachdirection in which there are transmitting towers.Go to www.antennaweb.org and type in your zip codeto obtain specific tower and antenna information.NOTE: If the DTV is switched off by pressing thePOWER key or unplugging the AC duringDigital Add-On Search, all channel infor-mation detected before the power lossoccurred will be saved. IMPORTANT FACT: This DTV maintains only one database ofdigital channels. Therefore, when you search for ClearQAMdigital cable channels, the database of antenna digital channelswill be deleted. You will only be able to receive those Clear-QAM channels your cable company provides.Cable companies rearrange virtualchannels as programmingchanges, which may cause theprogram you are watching to moveto another channel. This message will appear on the screenbriefly to notify you of a change. You will have to relocate theprogram you were watching by scanning through the channels.To restore the antenna digital channel database, reconnect theantenna and use the menu system to perform an All ChannelSearch.19Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032