This Plasma television will reproduce a crystal clear Digital picture and exceptional sound.The signal makes the difference!1 INITIAL SIGNAL CONNECTIONSAnalog RF Antenna Connection• Connect a Cable signal (with or without a cable box),Satellite Receiver, or RF antenna to the Analog RFinput.The analog tuner in this Plasma DTV receives AnalogAntenna signals, Analog Cable signals, or the RF outputfrom a Satellite Receiver, VCR, or cable box.CATV FRANCHISE NOTE: Cable companies, like publicutilities, are franchised by local government authori-ties. To receive cable programs, even with equipmentwhich is capable of receiving cable channels, the con-sumer must subscribe to the cable company’s service.ANALOG CABLEANALOG RFANTENNAANALOG SATELLITE RECEIVERVCR BACKDigital (DTV) RF Antenna Connection• Connect an RF Antenna to the Digital Antenna Interminal.The digital tuner in this DTV receives HD signals from anantenna. Digital signals from a Set-top Box (STB) arereceived through the Component In jacks.This DTV can receive ANY resolution being broadcast(HDTV, EDTV, or SDTV). However, ALL resolutions areconverted to 1080i for display.DIGITAL RFANTENNAPLASMA TV BACKFIRST-THINGS-FIRST (Required Initial Setup)ORVCR BACK VCR BACKPLASMADTV BACKORPLASMADTV BACKPLASMADTV BACKNotes: If you do not have a VCR, connect signal directly to the TV 75ohm terminal (UHF/VHF/CATV).Don’t be fooled by the phrase “Available in High-Definition.” The only resolution available with any of theseanalog connections, regardless of the original content, isstandard analog (SDTV).DIGITAL ANTENNA INPUT DTV will select the correct Antenna mode for the type ofAnalog RF signal connected automatically. Use “Analog Antenna Signal” in the Setup menu to changethe Antenna Mode. If you move the DTV to a new location, press the RESETkey twice after connecting the signal and turning on theDTV.7Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032(Continued on next page.)