1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radia-tors, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two bladeswith one wider than the other. A grounding-type plughas two blades and a third grounding prong. Thewide blade or the third prong are provided for yoursafety. If the provided plug does not fit fully into youroutlet, consult an electrician for replacement of theobsolete outlet.10. Protect the power cord from being walked on orpinched particularly at plugs, convenience recepta-cles, and the point where they exit from theapparatus.11. Only use attachments/accessories specified by themanufacturer.12. Use only with the cart, stand, tripod,bracket, or table specified by the manu-facturer, or sold with the apparatus.When a cart is used, use caution whenmoving the cart/apparatus combinationto avoid injury from tip-over.13. Unplug this apparatus during lightning storms orwhen unused for long periods of time.14. Refer all servicing to qualified service personnel. Ser-vicing is required when the apparatus has beendamaged in any way, such as power-supply cord orplug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus hasbeen exposed to rain or moisture, does not operatenormally, or has been dropped.15. If an outside antenna is connected to the televisionequipment, be sure the antenna system is groundedso as to provide some protection against voltagesurges and built up static charges. In the U.S. Selec-tion 810-21 of the National Electrical Code providesinformation with respect to proper grounding of themast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size ofgrounding conductors, location of antenna dischargeunit, connection to grounding electrodes, andrequirements for the grounding electrodes.EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICALCODE, ANSI/NFPA 7016. An outside antenna system should not be located inthe vicinity of overhead power lines or other electricallight or power circuits, or where it can fall into suchpower lines or circuits. When installing an outsideantenna system, extreme care should be taken tokeep from touching such power lines or circuits ascontact with them might be fatal.17. "Apparatus shall not be exposed to dripping orsplashing and no objects filled with liquids, such asvases, shall be placed on the apparatus."WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-ANCE TO RAIN OR MOISTURE.IMPORTANT SAFETY INSTRUCTIONS“Note to CATV system installer:This reminder is provided to call the CATV system installer’s attention toArticle 820-40 of the NEC that provides guidelines for proper groundingand, in particular, specifies that the cable ground shall be connected tothe grounding system of the building, as close to the point of cable entryas practical.”2 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUT-ING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATINGAND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOM-PANYING THIS UNIT.