Recording18An external sensor can be connected to each channel.1 Connecting an external switch to an external alarminput terminal.2 Set the following items using the control button({|}~).3 Select "RECORDING" using the control button({|) and select "ALARM" using the control button(}~).4 Select "ALARM RECORDING" using the controlbutton ({|) and set the alarm input terminalnumber.An ALARM recording is activated if there is an input inthe specified external alarm input terminal.Select a setting location (4 locations) using the controlbutton (}~), and select an input terminal numberusing the control button ({|).5 Select "PRE RECORD" using the control button({|) and select the pre recording as necessaryusing the control button (}~).6 Select "POST EVENT RECORD" using the controlbutton ({|) and select the recording time asnecessary using the control button (}~).Selections: 2 to 30 SECONDS, 1 to 5 MINUTES,10 MINUTES, 15 MINUTES7 Press the EXIT/STOP button once operations arecomplete.Press the EXIT/STOP button repeatedly to return to thelive screen.Memo: Set the alarm input conditions using "ALARM-SET"in LIVE settings. (P32)D ALARM recording• RESOLUTION• CHANNEL• FRAME RATE• QUALITYPOWERMODEAUTOMENUCamera(Sold separately)Monitor(Soldseparately)RECORDRESOLUTION FULLCHANNEL CFRAME RATE 1 ipsQUALITY NORMALRECORDING ALARMMOTION ZONE FULL ZONEMOTION SENSITIVITY 9ALARM RECORDING -- -- -- --PRE RECORD OFFPOST EVENT RECORD 5 SECONDSAUDIO OFFTIMER SETREAL-TIME REC SET11
