50Operations using the NetworkThis unit can be operated from a PC screen by using the supplied network operation software "Sanyo DVR Utility 2000S".Prior to performing network operations make the following preparations.• Network connection:Connect this unit and the PC using a LAN or Internetconnection. (P5)• Network settings:Set the network connection settings on the NETWORKscreen of this unit. (P42)• CPU: Intel Pentium4 1.2 GHz or higher• Memory: Windows VISTA: Minimum 512 MB(1 GB or higher recommended)Windows XP: Minimum 256 MB(512 MB or higher recommended)• VGA: 16 MB (64 MB recommended)• Resolution: 1024 × 768• Disk capacity: 10 MB(More than 2.1GB when using Sanyorecording software)• Operating System:Windows VISTA,Windows XP Professional SP2/Windows XP HomeDirect X: Direct X 8.1 or aboveInstall using the interactive screen.1 Insert the supplied CD-ROM in the CD drive anddouble-click "Sanyo Client.exe".The installer runs.2 Confirm the installation destination folder on the"Choose Destination Location" screen and click[Next].To change the installation destination folder, click[Browse] and select a folder.Connection and settings• The IP address and other settings on the PC must beappropriate for the connection.• The maximum number of PCs that can be connectedto one DVR is 4.Operating environmentInstalling "Sanyo DVR Utility 2000S"
