RECORD SET3English 672 Turn the jog dial to select “2.RECORDING AREA SET” from the screen, and then turnthe shuttle dial clockwise.The screen is displayed.3 Turn the jog dial to select “AREA FULLRESET”, and then turn the shuttle dialclockwise.“NO” on the screen flashes.4 Turn the jog dial to select “YES”, andthen turn the shuttle dial clockwise.“NORMAL RECORDING AREA” is set to overwrite once.5 Use the same procedure to makesettings for the “ALARM RECORDINGAREA”.6 Press the [EXIT/OSD] button.The setting procedure is ended and the display returns tothe normal screen.z To perform overwriting automatically, set“OVERWRITE” for either “NORMAL RECORDINGAREA” or “ALARM RECORDING AREA” from screen to “ON”.(JP.67)z Whenever “AREA FULL RESET” is performed for“NORMAL RECORDING AREA” or “ALARMRECORDING AREA”, the video recorded in thecorresponding area will be overwritten.z Images in the archive area are erased when “AREAFULL RESET” is performed for the archive area.Use the following setting procedure to indicate whetheroverwriting is to be performed (deleting old video) orrecording is to be stopped when any of the hard disk’srecording areas become full.1 Turn the jog dial to select“OVERWRITE” for normal recordingarea, and then turn the shuttle dialclockwise.“ON” flashes.TOTAL CAPACITY : 82GBNORMAL RECORDING AREA : 80 %AREA FULL RESET ->ALARM RECORDING AREA : 19 %AREA FULL RESET ->ARCHIVE AREA : 1 %AREA FULL RESET ->CAUTION : WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED !AREA FULL RESETARCHIVE AREAARE YOU SURE ?NOCHANGE:JOG SET:SHUTTLEFlashingTOTAL CAPACITY : 82GBNORMAL RECORDING AREA : 80 %AREA FULL RESET ->ALARM RECORDING AREA : 19 %AREA FULL RESET ->ARCHIVE AREA : 1 %AREA FULL RESET ->CAUTION : WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED !EXIT/OSDSetting recording conditionsSetting overwriting for the normal recordingareaNORMAL RECORDING AREAOVERWRITE : ONALARM RECORDING AREAOVERWRITE : ONREMAINING DISK WARNING : **SERIES REC : OFFAUTO DELETE : OFF
