|
RECORD SET384 EnglishSETTINGSz The period for “T-1” through “T-4” as set in step 9changes to that of “TIME PERIOD A” or “TIME PERIODB” on P.57.z When time period is unset, T-1 settings are enabledand T-2 through T-4 are disabled.z The sensitivity level can be checked using the settingscreen. When motion is detected, the sensor colorchanges from green to red, and a buzzer is sounded.If detection is too sensitive, an alarm can be triggeredeven by slight changes in lighting; accordingly, thesensitivity level should be set to match the cameralocation.1 Press the [MENU] button and turn thejog dial to select “2. RECORD SET”, andthen turn the shuttle dial.The screen is displayed.2 Turn the jog dial to select “8. ALARMOPERATION SET”, and then turn theshuttle dial clockwise.The screen is displayed withthe cursor positioned on “ALARM RETRIGGER”.3 Turn the shuttle dial clockwise.“OFF” flashes in the “ALARM RETRIGGER” field.4 Turn the jog dial to set the alarm triggerto “ON”, and then turn the shuttle dialclockwise.The cursor moves to “MAIN MON. DISPLAY”.[Settings] ( indicates default setting)1 Turn the jog dial to select “MAIN MON.DISPLAY”, and then turn the shuttle dialclockwise.“NC” starts to flash for “MAIN MON. DISPLAY”.[Settings] ( indicates default setting)Setting alarm operation and displayMENUALARM RETRIGGER : OFFMAIN MON. DISPLAY : NCALARM PRIORITY : LASTMON.2 DISPLAY : OFFSetting DescriptionOFF Even if a new alarm is received on the same channelduring alarm recording, the duration is not extended.ONIf a new alarm is received on the same channel duringalarm recording, the duration is extended and bothalarms are treated as one. (Example: Input in the alarmsequence A → C) However, if the new alarm is on adifferent channel, the alarms are treated separately.(Example: Input in the alarm sequence A → B → C)Setting alarm displaySetting DescriptionFULLWhen an alarm is detected, the video on thechannel containing the alarm is displayed in fullscreen format on the main monitor.9 When an alarm is detected, a multi-9 screendisplay is presented on the main monitor.16When an alarm is detected, a multi-16 screendisplay is presented on the main monitor. (This canonly be set on the DSR-3716.)NC The main monitor’s display does not change whenan alarm is detected.CH1CH2AlarmAlarmAlarm Recording AExample:AlarmAlarm Recording CAlarm Recording BALARM RETRIGGER : ONMAIN MON. DISPLAY : NCALARM PRIORITY : LASTMON.2 DISPLAY : OFF
|
