34 EnglishSETTINGS4 DISPLAY/BUZZER SETYou can set the display item on the operation display area.This sub-menu also lets you set a warning buzzer to soundfor alarms or when the hard disk space reaches zero. Youcan set items as needed.[Settings] ( indicates initial setting.) setting items(1)(2)(3)(4)(5)(6)(7)(8)(9)X180 HI A05-20-04 AL 0001508:30:35 ----------X180 HI A05-20-04 AL 0001508:30:35 ----------(1)(2) (4)(3)Item Setting Description(1) DATE/TIME ON Display date/time in operation display area.OFF Don’t display date/time in operation display area.(2) QUALITY/AUDIO ON Display picture quality and “A” (audio recording) in operation display area.OFF Don’t display picture quality or “A” (audio recording) in operation display area.(3) DVR NAMEON Display name set for digital video recorder. OFF Don’t display name set for digital video recorder.(4) ALARM COUNT ON Display current alarm count in operation display area.OFF Don’t display current alarm count in operation display area.(5) ALARM ON ON Sound buzzer when alarm is received.OFF Don’t sound buzzer when alarm is received.(6) DISK FULL ON When “OVER WRITE” is not set, sound buzzer when remaining hard disk space reaches zero.OFF When “OVER WRITE” is not set, don’t sound buzzer when remaining hard disk space reaches zero.(7) KEY INON Sound buzzer when operation button is pressed. OFF Don’t sound buzzer when operation button is pressed.(8) WARNING ON The buzzer sounds in the following cases: zHard disk drive error zFan error zRecording error.zNo input signal when VIDEO LOSS is ON.OFF Don’t sound buzzer in the following cases: zHard disk drive error zFan error zRecording errorzNo input signal when VIDEO LOSS is ON.(9) NON RECON Sound buzzer when recording stops, or when recording is intentionally stopped. OFF Don’t sound buzzer when recording stops.e00_l8hae_us_7.book Page 34 Thursday, April 8, 2004 11:14 AM
