Sanyo FW32D08F Manual

Also see for FW32D08F: Start guide

Watching channels from an externaldeviceSwitching each input mode can easily switch with the remote controlbetween TV (DTV or analog TV) and external devices when they areconnected to the unit.1 Turn on the set-top box or the connected device.● The picture from the set-top box or the connected device mightappear automatically on the TV screen.If the picture does not appear① Press SOURCE repeatedly to select the set-top box or the connecteddevice and wait a few seconds between each selection until thepicture appears.● Pressing H reverses the direction of the input modes.11.1VideoComponentHDMI2HDMI1VideoHDMI2HDMI1TVSourceorDTV / Analog TVchannele.g.)② Use the remote control for the set-top box or the connected deviceto select channels to view.Changing picture and sound settings1 Press PIC/SOUND MODE to set your TV to a predefined Pictureand Sound setting.2 Use H I to select one of the following settings :Autopicture Auto sound DescriptionPersonal The customized settings you definedusing the Picture and Sound menuStandard For normal TV viewingVivid Enhanced picture contrast, sharpness andsound for viewing in a well-lit roomSports Brilliant picture settings and clear soundfor high actionMovie Deep picture and powerful sound settingsfor a cinematic experienceGame – Optimized for PCs and game consolesEco – Eco TV settings for low powerconsumption– Music Optimized for music playback– News Controls picture tone and sets theanchor's voice at a comfortable volumelevelSleep timerSleep timer can set the unit to go into standby mode after an incrementalperiod of time.Press SLEEP repeatedly to change the amount of time(increases the time by 30 minutes up to 120 minutes).Press SLEEP once to call up the display for checking the remaining time.● To cancel sleep timer, press SLEEP Repeatedly until Off is displayed.Switching audio modeDigital TV operation1 Press SAP to display the currently selected language and thenumber of available languages.2 Press SAP repeatedly to cycle through the available audiolanguages.11.11/21080i 16:9HDCC: TV-MA : X: TV-14 : NC-17: TV-PC : R: TV-G : PG-13KABCaudioRatingEnglishUS movieUS movieUS movieUS movieUS TVUS TVUS TVUS TVRating information:A Day of MemoriesEnglishAudio information:Note(s)● Available languages differ depending on the broadcast.● Other is displayed when the audio language cannot be acquired or the acquired languagesare other than English, French or Spanish.Cable / NTSC (Analog) TV operation1 Press SAP to display the currently selected audio mode.2 While receiving an MTS broadcast, press SAPrepeatedly to cycle through the available audio channels.e.g.) When all audio modes are availableSAP / STEREOSAP / MONOSAP / STEREO11SAP / STEREOStereo : Outputs stereo audioMono : Outputs mono audioSAP : Outputs a second audio program120 min.Sleep timer17 .EnglishContinued on next page.