Sanyo FXD-MP900 Operating Instructions Manual

Sanyo FXD-MP900 Operating Instructions Manual Manual pdf 12 page image

-11-RADIO OPERATIONSELECTING RADIO MODE ........................................ 1Press the BND button c to switch from CD player or AUX mode to the radio.Each time the BND button is pressed, the selected band changes as shown below.RADIO TUNING ........................................................ 2• Automatic tuning ............ Press the or button d for more than 0.5 second until it beeps twice if thebeep tones are on. When the button is released, the system will start automatictuning and stop at the next receivable station.• Manual tuning ................ To select higher frequency stations, press the button for less than 0.5second.To select lower frequency stations, press the button for less than 0.5second. To quickly scan up or down in frequency, press and hold the orbutton. Release the button when the display approaches the desired frequency,then press and release the button repeatedly until the desired frequency isdisplayed.STORING PRESET STATIONS ................................... 3The preset buttons e can be used to store 6 stations in each band (FM1, FM2, FM3 and MW) for convenientaccess to your favorite stations.• Programming stations ..... Select the desired band, then tune in the station you want to store in memory.Press and hold one of the preset buttons for more than 2 seconds.Repeat steps and to program additional stations.• Quick tuning.................... Select the desired band, then press one of the six preset buttons.121 22FM1 FM2 MWFM315324