Sanyo FXD-MP900 Operating Instructions Manual

Sanyo FXD-MP900 Operating Instructions Manual Manual pdf 7 page image

-6-BATTERY INSTALLATIONInstall a lithium battery (CR2025) with the poles facing the correct direction.BATTERY REPLACEMENT TIMINGWhen battery power is depleted, the buttons may not be operable.If the remote controller does not operate, replace the battery and check the operation.CAUTIONS REGARDING BATTERYBe sure to follow the instructions to prevent battery leakage, over-heating, ignition, or explosion.If battery leakage has occurred, wipe the container first, then install a new battery. If the battery solutioncontacts the skin, wash off with water completely.CAUTIONS REGARDING REMOTE CONTROLLER• Do not leave the remote controller in an area exposed to direct sunlight, such as on the dashboard orsteering wheel. The remote controller may deform because of the heat. (Be especially careful of thedashboard exposed to direct sunlight in the summer, as it will become extremely hot.)• When the vehicle is parked in an area exposed to direct sunlight, remove the remote controller from itsholder and put it in a shaded spot such as the glove box.• Under direct sunlight, signal reception from the remote controller becomes weakens. If this happens, holdthe remote controller close to the signal receptor on the front panel.Positive pole faces upward.• Do not expose the battery to flame. Do not short circuit, disassemble, or heat the battery.• Do not charge the battery.• Use the specified type battery.• Keep the button-shaped battery away from children to prevent accidental swallowing.• If the battery is swallowed, contact a doctor immediately.WARNING• Install the battery with the poles facing the correct direction.• When not in use for a long period of time, or if the battery is dead, remove the battery fromthe remote controller.CAUTION