Sanyo FXD-MP900 Operating Instructions Manual

Sanyo FXD-MP900 Operating Instructions Manual Manual pdf 26 page image

-25-ERROR SIGNSCD PlayerIf a problem should occur while operating the built-in CD player, one of the following error signsmay be displayed:CD ChangerIf a problem should occur while operating the connected CD changer, one of the following error signs maybe displayed.Abnormal CD mechanism function.Internal connection check error. Contact the place of purchase.No disc in the player. Insert the disc.Press the eject button.Turn the power off and then on again.If it is not corrected, contact the placeof purchase.The disc is dirty.CD is inserted upside down.Clean the disc.Insert the CD properly.Error SignE01E07E99NO CDCause RemedyError SignE01E07E30NO CDNO CDCCause RemedyAbnormal mechanism functionThe disc was inserted incorrectly.The disc is dirty.The disc is defective.There is condensation on theoptical lens.Excessive temperature has beendetected in the vehicle.No discs in the magazine.The connector is connectedincorrectly.Contact the place of purchase.Insert the disc properly.Clean the disc.Use another disc.Leave the disc player off for an houror so, then try again.Refer to the instructions supplied withthe CD changer.Allow the car to cool.Load discs into the magazine.Connect the connector correctly andsecurely until it clicks.Abnormal amplifier. Check the speaker line code.Error SignE10Cause Remedy