Sanyo LCD-19K40 Instruction Manual

18BASIC OPERATIONConnect LCD TV's AC Power Cord into an AC outlet.213TURNING ON / OFF LCD TVComplete the peripheral connections before turning on LCDTV. (Please refer to "CONNECTING LCD TV".)Press POWER ON/OFF button on Side Controls of LCD TVor on Remote Control to turn it ON. The POWER indicatorwill light up (green). Press POWER ON/OFF button againto shift it to stand-by status, the POWER indicator will becomered.NO SIGNAL SHUT OFFThis TV set incorporates the NO SIGNAL SHUT OFF function.If no signal is input in TV mode, "OFF 00:10" will display forabout 10 minutes and TV will be turned off automatically.PLUG & PLAYBy PLUG & PLAY, when the TV reset and powered on for thefirst time, it will automatically search and preset all the receivableTV programs.I AM SEARCHING ALL PROGRAMMESPLEASE WAIT!MENU : CANCEL1After programs searching, SHOP MODE menu will appear.Press POINT ◄► buttons to select and press ENTERbutton for SHOP MODE or HOME MODE. Then the popup menu disappears. For the details, please refer to"SHOP MODE" on page 30.213Plug the power, connect the antenna, and press Main PowerON/OFF button, the TV set will automatically search theprograms.Auto searching completed and message "AUTO SET-UPCOMPLETED HAPPY VIEWING!" appears. About 5 secondslater, the TV set will automatically return to programmeposition “1”.PLEASE SELECT AND PRESS ENTER BUTTONHOME MODE SHOP MODEENTER : ENTER: SELECTAUTO SET-UP COMPLETEDHAPPY VIEWING!NO STATIONPLEASE CONNECT ANTENNA PLUG!Figure A.ENTER : ENTER: SELECTPLEASE SELECT AND PRESS ENTER BUTTONTEMPORAL CANCEL PERMANENT CANCELFigure B.Note:● Message "NO STATION PLEASE CONNECT ANTENNA PLUG!"will appear if there is no TV stations are searched afterautomatically programs searching.(see Figure A.) ThenSHOP MODE menu appears, the same operations as step 2above will be excuted and returns to normal TV picture.● Press MENU button while searching programs, message"PLEASE SELECT AND PRESS ENTER BUTTON" appears(see Figure B), press POINT◄► buttons to select"TEMPORAL CANCEL" or "PERMANENT CANCEL".- "TEMPORAL CANCEL" to cancel temporary PLUG & PLAYfunction. The PLUG & PLAY function is actived only in TVmode while turning on the LCD TV.- "PERMANENT CANCEL" to cancel permanetly PLUG &PLAY function. When turn on television the PLUG & PLAYis not actived.Press ENTER button to enter SHOP MODE menu. the sameoperations as step 2 above will be excuted and returns tonormal TV picture.REMOTE CONTROLSIDE CONTROLPOWER ON/ OFFbuttonPOWER ON/OFF button