Sanyo LCD-19K40 Instruction Manual

34DEALER MODEThe Dealer Mode has 9 different modes: VOLUME LOCK,TUNING LOCK, START MODE, OSD, RC, AC POWER MODE,START VOLUME LEVEL, MUSIC MODE SETUP and RESET.REMOTE CONTROLVOLUME LOCKThis function is used to limit the maximal volume.START MODEThe LCD TV will automatically enter to the setting mode whilebeing turned on. You can select OFF, TV(0-10), AV1(S-VIDEO),AV2(DVD), HDMI or PC in START MODE. When it is set "OFF",it will keep the mode before being turning off.OSDWhen it is set "OFF", Corresponding OSD cannot display on thescreen while operating.INFO buttonDEALER MODE MENUTO DISPLAY DEALER MODE:Press INFO button on remote control while holding MENU button on Side control to display Dealer modemenu.DEALER MODERCYou can set "ON" or "OFF" in RC MODE. Use this feature to setRemote Control Function including Power ON/OFF function.● ON- Set Remote Control to normal function.● OFF- Set buttons on the Remote Control to prohibit to use includePower button.TUNING LOCKThe way to prevent user from executing the Tuning function.TUNING LOCKSTART MODEOSDRCAC POWER MODEOFFOFFDEALER MODEVOLUME LOCK OFFRESETMUSIC MODE SETUPOFFOFFSTAND: SELECT : ADJUST : BACK : EXITSTART VOLUME LEVEL OFFPress POINT ◄► buttons to select a maximal volume.VOLUME LOCK will be the default selection. (When youadjust others, press POINT ▲▼ buttons to select the itemdesired.)Press POINT ◄► buttons to select "ON". (The maximalvolume is the set value by step 1.)Press INFO button on remote control while holding MENUbutton on Side control to display Dealer mode menu.Press menu button to exit menu operation.12345Take the way of setting VOLUME LOCK for example:SIDE CONTROLMENU buttonPOINT ▲/▼/◄/►buttons