Sanyo LCD-19K40 Instruction Manual

27TIMERTIMER MENU12Press MENU button and the main menu will appear.Press POINT ◄► buttons to select "TIMER", and will displayTIMER menu.Press POINT ▲▼ buttons or ENTER button to enter intoTIMER menu.Press POINT ▲▼ buttons to select the item desired.■ Press BACK button to return to the previous menu.■ Press MENU button or wait for 5~60 seconds (refer to"DURATION" on page 28) to exit menu operation.3Note:● When OFF TIMER countdown time reach 1 minute, OFF TIMEROSD always showed for user information about power off timeremain.● OFF TIMER will be cancel when press any button during thecountdown time dsplay.● If ON TIMER didn't set, ON TIMER CH function will not actived.● OFF TIMER and ON TIMER will be automatically cancelledduring searching channels.● The settings for OFF TIMER and ON TIMER will be automaticallycancelled after the settings has been operated for one time.● In case you left TV without any operation for 2 hours after poweron by ON timer, TV will automatically power off itself.To set channel position, you can use NUMERIC buttons or DIGITbutton. (Please refer to "DIRECT SELECTION" on page 19.)After ON TIMER has been set, ON TIMER INDICATOR will be light.ON TIMERTo cancel "ON TIMER MODE", you can choose any option bythe following ways.- Setting "- - : - -" in ON TIMER.- Disconnecting the AC power cord.Once ON TIMER has been set, you won't miss any opportunityto watch the program you like.Press POINT ◄► buttons to enter the item selected.4Once OFF TIMER has been set, when the set time is reached,the TV will shift to stand-by status.OFF TIMERTo select "OFF", "30 MIN", "60 MIN", "90 MIN" or "120 MIN" withPOINT ◄► buttons or TIMER button.To cancel "OFF TIMER ", you can choose any option by thefollowing ways.- Setting "OFF" in OFF TIMER menu.- Pressing POWER ON/OFF button on Side Control.- Pressing POWER ON/OFF button on Remote Control.MENU OPERATION (TV/AV/HDMI mode)TIMERON TIMER 12 : 30OFF TIMER OFFON TIMER CH 16SELECT ADJUST BACK EXIT: : : :TIMERON TIMER 12 : 30OFF TIMER OFFON TIMER CH 16SELECT ADJUST BACK EXIT: : : :TIMERON TIMER 12 : 30OFF TIMER OFFON TIMER CH 16SELECT ADJUST BACK EXIT: : : :0~9TIMERON TIMER 12 : 30OFF TIMER OFFON TIMER CH 16SELECT ADJUST BACK EXIT: : : :0~9ON TIMER CHThis function is only active that ON TIMER has been set. Whenthe set time in ON TIMER is reach, the TV will turn on and enterthe channel position you set directly .To set channel position, you can use NUMERIC buttons or DIGITbutton. (Please refer to "DIRECT SELECTION" on page 19.)