Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual

Also see for PDG-DHT100L - DLP Projector - HD 1080p: Brochure Brochure & specs Owner's manual Specifications Specifications

Contents

Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual Manual pdf 20 page image

20Chapter 2 InstallationNetwork configuration (Type2)Confirmation of the network menuWhen installing this product to the projector, the network on-screen menu items forthis product are activated automatically. If not activated, the product may not havebeen installed correctly. Please check item “Mounting” (☞ p.14).Configure the networkWhen you connect the projector to the network, the network number of projectormust be the same as the network you intend to connect. You should configure pro-jector’s network first.This example explains how to set the following configuration.The default network configuration is set as follows.IP Address : 192.168.1.201Subnet Mask : 255.255.255.0Default Gateway : 192.168.1.1DNS : 0.0.0.0IP Address : 192.168.0.2Subnet Mask : 255.255.255.0Default Gateway : 0.0.0.0DNS : 0.0.0.01 Selection of network menu [Network]Turn on the projector and display the menu on the screen. Select the Network iconfrom the Setting sub menu using the point buttons (d e 7 8) and then press theSELECT button on the remote control or on the projector. Confirm that its modeis set "On". If not, change mode to "On" using the point buttons 7 8.* The above on-screen display may differ fromthe actual display depending on the functionsof the projector you use.For the Projector which provides the Network sub menu in the Setting main menu