68Chapter 6 Use of Serial PortControl the projector with TelnetThis product allows you to control the projector by using the Telnet application.Normally, it is used for controlling the external equipment connected to the serial portand also control the projector itself by specifying the telnet port no.10000.* It is not affected by the serial port setting of the projector when using the telnet appli-cation.In the step 2 of the previous page, enter port no. “10000” after the IP address no.> open 192.168.1.201 10000 return* Use the IP addressassigned to the pro-jectorAfter the communication is established, type the password and the command forcontrolling the projector and then enter “Enter” key.The right table shows the typical command lists for controlling the our projector andplease consult your local dealer for further information of another commands.Command FunctionC00 Turn the projector onC01 Turn the projector offC05 Selects input1C06 Selects input2C07 Selects input3C08 Selects input4C09 Volume upC0A Volume downC0B Mute onC0C Mute offC0D Video mute onC0E Video mute offC1C Menu display onC1D menu display offCommand list table
