49Network BoardOWNER’S MANUALENGLISHControl the Projector✐ The timer operates by using the clock function provided in this product. Before setting thetimer, please confirm that the current date and time are set correctly. Timer and clock func-tions are functioning using a lithium battery provided in this product. When the battery runsdown, the clock and timer functions will not operate correctly. Consult your local dealer forthe replacement of battery. The replacement must be carried out by a qualified service per-sonnel.Getting the current timeThe displayed time is the value set when the setting page was displayed. This timevalue is not updated automatically. To update the display time press the Refresh but-ton.Notes on timer setting✐ Up to 10 timer events can be registered. Timer events always operate according tothe next valid event depending on the projector's power status. In the examplebelow, event 3 turns on the projector so next event 4 (also turning on projector)will not be effective because the projector is already turned on. Similarly, when theprojector is turned off by event 5, event 6 OFF will not be effective in turning it offagain. But these secondary events (event 4 and event 6) will become effective if aperson turns off the projector (after event 3 and before event 4) or turns on theprojector (after event 5 and before event 6).✐ When the timer events are set at the same time, the last event set will overridethe previous events. For example, if there is an event like “On at 8:00 everyday”and then new event is set like “Off at 8:00 everyday”, only the last setting event iseffective.✐ When the timer event ON occurs during cooling down period, this is invalid eventbecause the projector cannot be turned on during this cooling down period.Cancel the timerTo cancel the timer event, check thetimer event you want to delete and thenpress the Delete button.Projector PowerEvent 1 ONEvent 2 OFFEvent 3 ONEvent 4 ONEvent 5 OFFEvent 6 OFFON ONInvalid event Invalid eventTime