Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual

Also see for PDG-DHT100L - DLP Projector - HD 1080p: Brochure Brochure & specs Owner's manual Specifications Specifications

Contents

Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual Manual pdf 23 page image

23Network BoardOWNER’S MANUALENGLISHNetwork configurationNotice about system constructionFor installation of multiple projectors into the same network withNetwork Board.Do not install multiple projectors with Network Boards that have their default net-work settings to the same network. The use of the Network Boards which have thedefault IP address set to the same network settings will cause IP addresses to collideand create a malfunction. When you install multiple projectors into the same net-work, configure the network with the following steps.1. Change the IP address from the default IP address. To change the IP address, usethe network setting menu on the projector. Please see chapter “NetworkConfiguration” for further information (☞ p.16-22).2. Make sure that there is no network equipment set with the same IP address in thenetwork, and then connect to the network.3. When installing other projectors, follow the above steps to change the IP addressand connect to the network.In case of installing the projector with Network Board into the networkconstructed with the DHCP/BOOTP server.This Network Board does not support the DHCP/BOOTP server. The static IP addressmust be manually configured. To use this product in this network environment, set itup so that the DHCP/BOOTP server does not assign the IP address configured to thisproduct for another device on the network. Please consult your network administra-tor for further information.