Sanyo PJ-Net POA-LN01 Installation And Operation Manual

Also see for CE42LM4N-NA - CE - 42" LCD Flat Panel Display: Specifications Specifications Specifications Instruction manual

Contents

Sanyo PJ-Net POA-LN01 Installation And Operation Manual Manual pdf 13 page image

13[3] Network configurationWhen you connect a monitor to a network, the network number of monitor must be thesame as the network you intend to connect. You should configure monitorʼs network first.Make sure that the monitor is connected to the network correctly. To configure the network,use the computer. Refer to the chart below.Network configurationConfigure the network with computerTemporarily set up the computer'snetwork with the default networknumber of the PJ-Net Organizer.Restart the Computer, if requiredUsing the web browser and login tothe setting page of the PJ-NetOrganizer by accessing the defaultIP address.Change the network address youwant to connect to the existingnetwork through the setting menuon the browser.Restart the PJ-Net OrganizerReset to the computer's originalnetwork configuration.Completing the network configuration. Perform the basicsetting and operation of the monitor by using the webbrowser. Please see chapter "2: Basic Setting andOperation" on page 21 for further information.Please see furtherinformatin on pages14-19.Please see furtherinformatin on pages22-25.Example of monitor's configurationIP Address : 192.168.0.5Subnet Mask : 255.255.255.0Default Gateway : (blank)DNS : (blank)Default Network Address of the PJ-NetOrganizerIP Address : 192.168.0.2Subnet Mask : 255.255.255.0Default Gateway : 0.0.0.0DNS : 0.0.0.0Example of monitor's configurationIP Address : 172.21.95.224Subnet Mask : 255.255.255.0Default Gateway : 172.021.095.001DNS : 172.21.1.53p.14Procedure of Connecting the monitor to the network