8InstallationThe following are instructions for attaching this product to the monitor and connecting it tothe network. Please review the entire procedure to become familiar with it.Check package (p.9)1Installation (p.10-12)2Network configuration (p.13-19)3Setting up is completed.Please check the contents of a package. This product contains a network board,and an ownerʼs manual (this manual). Also please check the name and function of1. Mount this product onto the monitor and connect the interface cable between thisproduct and the monitor.2. Set the option switch on the monitor to down (Net-Organizer mode).3. Connect the LAN cable and join it to the network.Configure the network with the computer.Flow of installationThe preparation is completed to control the monitor connected to the network. At next step,set up and control the monitor via the network by using the web browser installed on yourcomputer. Please see “Basic setting and operation” on page 21.each part.