Sanyo PJ-Net POA-LN01 Installation And Operation Manual

Also see for CE42LM4N-NA - CE - 42" LCD Flat Panel Display: Specifications Specifications Specifications Instruction manual

Contents

Sanyo PJ-Net POA-LN01 Installation And Operation Manual Manual pdf 14 page image

Configure the network with the computerThis example explains how to set the following configuration.The default network configuration is set as follows.Make sure that the monitor is connected to the network and then connect the AC cord tothe outlet.1 Temporarily*1 set up your computer network configuration to the same IP network num-ber as the PJ-Net Organizer. For example, change your computer network configura-tion as follows and restart the computer.The network configuration of computer differs depending on each network environment oryour computer. For further information, please see the chapter “Configure the network ofcomputer” on page 17.14InstallationIP Address : 172.21.95.224Subnet Mask : 255.255.255.0Default Gateway : 172.21.95.1DNS : 172.21.1.53IP Address : 192.168.0.2Subnet Mask : 255.255.255.0Default Gateway : 0.0.0.0DNS : 0.0.0.0IP Address : 192.168.0.5Subnet Mask : 255.255.255.0Default Gateway : (blank)DNS : (blank)*1 Change your computerʼs network configuration temporarily. After completing the set up for the mon-itor, you must set up again to the original network configuration for your computer. It is recommend-ed to make a note of those network settings.