Sanyo PJ-Net POA-LN01 Installation And Operation Manual

Also see for CE42LM4N-NA - CE - 42" LCD Flat Panel Display: Specifications Specifications Specifications Instruction manual

Contents

Sanyo PJ-Net POA-LN01 Installation And Operation Manual Manual pdf 15 page image

152 Configure the network of the monitor by using the web browser.1. Enter the IP address of the monitor as the URL. The login page will be displayed andlogin. For further information, please see chapter “2: Basic Setting and Operation” onpage 21.2. Configure the network through the setting page on the browser. For further informa-tion, please see chapter “Network Configuration” on page 25.Completing of installationNow the installation is completed. The IP address of this monitor has been set to“172.21.95.224”. You must reset the network configuration of the computer to the origi-nal and restart the computer.Next, please see chapter “Basic Setting and Operation” on page 22 It describes how tooperate and set up the monitor .Network configuration✐ If you use a cable to connect the monitor and computer directly, without using a hub, you must usea UTP cross cable. In this case, you cannot access the login page if the setting of web browser isset to “Use proxy server”. It must be changed to the “Not use proxy server”. For further information,please see the “Web browser setting” of chapter "Appendix" on page 46.✐ When you set up the network of monitor which has a default setting by using the computer, it mustbe carried out in the network which does not provide any gateways (routers).