Sanyo PLC-EF12B Owner's Manual

Also see for PLC-EF12B: Service manual

Contents

50OPERATING WIRELESS MOUSEINSTALLATIONThe Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mousefor most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouseoperation.The wireless mouse is available only when PC mouse pointer is displayed on the screen. When the menu orthe indicator of the projector is displayed on the screen instead of the PC mouse pointer, the wireless mousecannot be used.Connect the mouse port of your computer to the Control Port ofthe projector with the Control Cable. (Refer to page 15 to 20 forconnection.)Turn the projector on first, and then turn on your computer.When the computer is switched on first, the Wireless Mouse maynot work properly.12To use the Wireless Remote Control Unit as the Wireless Mouse for a Personal Computer, installation of themouse driver (not supplied) is required. Make sure that the mouse driver is properly installed in your computer.And make sure that the mouse port of the computer connected to Control Port is activated.OPERATING WIRELESS MOUSEWhen controlling the pointer of the computer, operate the Wireless Mouse with POINT button, SELECT (REARCLICK) button, and FRONT CLICK button on the Wireless Remote Control Unit.Used to move the pointer. The pointer is moved corresponding withthe direction you are pressing.POINT buttonThis button has the same function as the left button in a PC mouse.SELECT (REAR CLICK) buttonThis button has the same function as the right button in a PC mouse.Pressing this button does not affect any operation when in Menumode.FRONT CLICK buttonNote : When the computer has nomouse port, connect the SerialPort of the computer to ControlPort of the projector with theControl Cable for Serial Port.POINT button (Move the pointer)SELECT (REAR LICK) button(left button of the mouse)FRONT CLICK button(right button of the mouse)APPENDIXUSB Terminal can be also used as control port for wireless mouse operation. Connect the USB terminal of thecomputer to USB terminal of this projector with the USB cable (not supplied). In this operation, selectingWireless Mouse Mode on SETTING Menu is required. (Refer to P49).USING USB TERMINAL