Sanyo PLC-SP20N Owner's Manual

Also see for PLC-SP20N: Comparison chart

Contents

– 3 –IMPORTANT SAFETY INSTRUCTIONSAll the safety and operating instructions should be readbefore the product is operated.Read all of the instructions given here and retain them forlater use. Unplug this projector from AC power supplybefore cleaning. Do not use liquid or aerosol cleaners. Usea damp cloth for cleaning.Do not use attachments not recommended by themanufacturer as they may cause hazards.Do not place this projector on an unstable cart, stand, ortable. The projector may fall, causing serious injury to achild or adult, and serious damage to the projector. Useonly with a cart or stand recommended by themanufacturer, or sold with the projector. Wall or shelfmounting should follow the manufacturer’s instructions,and should use a mounting kit approved by themanufacturer.Do not expose this unit to rain or use near water... forexample, in a wet basement, near a swimming pool, etc...Slots and openings in the back and bottom of the cabinetare provided for ventilation, to insure reliable operation ofthe equipment and to protect it from overheating.The openings should never be covered with cloth or othermaterial, and the bottom opening should not be blocked byplacing the projector on a bed, sofa, rug, or other similarsurface. This projector should never be placed near orover a radiator or heat register.This projector should not be placed in a built-in installationsuch as a bookcase unless proper ventilation is provided.This projector should be operated only from the type ofpower source indicated on the marking label. If you are notsure of the type of power supplied, consult your authorizeddealer or local power company.Do not overload wall outlets and extension cords as thiscan result in fire or electric shock. Do not allow anything torest on the power cord. Do not locate this projector wherethe cord may be damaged by persons walking on it.Never push objects of any kind into this projector throughcabinet slots as they may touch dangerous voltage pointsor short out parts that could result in a fire or electricshock. Never spill liquid of any kind on the projector.Do not attempt to service this projector yourself as openingor removing covers may expose you to dangerous voltageor other hazards. Refer all servicing to qualified servicepersonnel.Unplug this projector from wall outlet and refer servicing toqualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the projector.c. If the projector has been exposed to rain or water.d. If the projector does not operate normally by following theoperating instructions. Adjust only those controls that arecovered by the operating instructions as improperadjustment of other controls may result in damage andwill often require extensive work by a qualified technicianto restore the projector to normal operation.e. If the projector has been dropped or the cabinet has beendamaged.f. When the projector exhibits a distinct change inperformance-this indicates a need for service.When replacement parts are required, be sure the servicetechnician has used replacement parts specified by themanufacturer that have the same characteristics as theoriginal part. Unauthorized substitutions may result in fire,electric shock, or injury to persons.Upon completion of any service or repairs to this projector,ask the service technician to perform routine safety checksto determine that the projector is in safe operating condition.This projector is equipped with agrounding type AC line plug. Shouldyou be unable to insert the plug intothe outlet, contact your electrician.Do not defeat the safety purpose ofthis grounding type plug.Follow all warnings and instructions marked on theprojectors.For added protection to the projector during a lightningstorm, or when it is left unattended and unused for longperiods of time, unplug it from the wall outlet. This willprevent damage due to lightning and powerline surges.An appliance and cart combinationshould be moved with care. Quickstops, excessive force, and unevensurfaces may cause the applianceand cart combination to overturn.If the projector is to be built into a compartment or similarlyenclosed, the minimum distances must be maintained.Do not cover the ventilation slot on the projector.Heat build-up can reduce the service life of your projector,and can also be dangerous.PROJECTOR(FRONT) PROJECTOR(SIDE)WALL50cm20cm50cm50cmGROUND