Sanyo PLC-SP20N Owner's Manual

Also see for PLC-SP20N: Comparison chart

Contents

– 44 –OTHER FUNCTION SETTINGThis projector has other function settings; Blue back, Display, Ceiling, Rear, Split wipe and Lamp age.BLUE BACKWhen this function is in the “On” position, the projector will project a blue image without video noise on the screen when thevideo source is unplugged or turned off.DISPLAYWhen this function is in the “On” position, on-screen displays always appear when adjustments are made. Although theseon-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To avoid this,you can keep back certain displays by switching this function “Off”. The followings are the displays that you can hide.¡Wait Display¡Mode Display¡Volume Display¡Mute Display¡Zoom/Focus Display¡Normal Display¡No show DisplayCEILINGWhen this function is in the ‘’On’’ position, the top/bottom and theleft/right picture reverse capability lets you project from a ceiling-mounted projector.REARWhen this function is in the ‘’On’’ position, the left/right picture reversecapability lets you project onto a rear projection screen.SPLIT WIPETurn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image sideways when the input source is changed.Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and thenext one appears from the center to side ways like drawing the black curtains.LAMP AGEThe Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lampreplacement monitor timer by using this function.T BT BL RL R